
GEAR OIL ADDITIVE

Application:
Gear Oil Additive multifunctional gear oil additive is based on sulphur-phosphorus chemistry. It has been developed for formulating both GL-5 automotive hypoid axle lubricants and industrial gear oils.
Features:
• Performance in both automotive and industrial applications
• Cost savings at all treat levelsMin
• Improved inventory control
• Security and confidence from a product in a family of gear oil additives with an extensive history of trouble-free performance worldwide.
Typical Characteristics:
Appearance | Clear Yellow liquid |
Phosphorus, %wt. | 1.17 |
Sulphur, % wt | 30 TO 36 |
Specific Gravity @ 15.6/15. 6 oC | 1.082 |
Viscosity @ 100 oC, cSt | 9.0 |
Flash Point, oC, Min | 76 |
![]() |
1. Gear Oil Additive

GEAR OIL (EP) ADDITIVE

Application:
Gear Oil Additive multifunctional gear oil additive is based on sulphur-phosphorus chemistry. It has been developed for formulating both GL-5 automotive hypoid axle lubricants and industrial gear oils.
Features:
• Performance in both automotive and industrial applications
• Cost savings at all treat levelsMin
• Security and confidence from a product in a family of gear oil additives with an extensive history of trouble-free performance worldwide.
Typical Characteristics:
Appearance | Clear Yellow liquid |
Phosphorus, %wt. | 1.17 |
Sulphur, % wt | 30 TO 36 |
Specific Gravity @ 15.6/15. 6 oC | 1.082 |
Viscosity @ 100 oC, cSt | 9.0 |
Flash Point, oC, Min | 76 |
![]() |
2. Gear Oil (EP) Additive

Hydraulic Oil Additive

INTRODUCTION:
It is Zinc, barium & calcium free hydraulic fluid package, offering excellent Antiware, corrosion protection and oxidation characteristics at low treatment level as 1 to 1.5 % by weight. Due its high load carrying capacity it is used to formulate high performance hydraulic fluids.
APPLICATION:
• Antiware hydraulic
• Neat cutting oil
• Speciality Products
TYPICAL DATA
COMPOSITION | – Combination of esters to suit the purpose. |
APPEARANCE | – Yellow to dark brown liquid at 30 ° C. |
ACID VALUE | – 8 mg KOH/ gm Max |
SAPONIFICATION VALUE | – 140 TO 160 mg KOH/gm |
S.G. @ 29-5 degree C | – 0.950 To 1. 1 |
Flash POINT | – 150 degree C Minimum |
![]() |
3. Hydraulic Oil Additive

KNITTING OIL ADDITIVE

Introduction:
Our KOE is excellent anti ware, corrosion protection and oxidation characteristics additive package. Its treatment levels is controlled byfinal kv @ 40 deg c of a product. Higher the kv at 40 deg c higher is the dosage required.
Applications:
• Anti wear knitting oils
• Speciality Products
TYPICAL DATA
COMPOSITION | – Combination of esters to suit the purpose |
APPEARANCE | – Light Yellow to dark yellow liquid . |
ACID VALUE | – 3 mg KOH/ gm Max |
SAPONIFICATION VALUE | – 9 TO 18 mg KOH/gm |
S.G. @ 29-5 degree C | – to report |
Flash POINT | – 150 degree C Minimum |
![]() |
4. Knitting Oil Additive

Engine Oil Additive

Introduction:
Introducing New Technology based Cutting Oil Emulsifier is a SPECIALLY designed Cutting Oil Emulsifier to work in Higher TDS of water. It is Free of Rosin, SPS, Amides and Biocides. It is mixture of Specially Formulated Esters of Edible Oil Fatty Acids to suit the purpose. It gives Excellent Performance in Higher TDS and Water Hardness.
Advantages:
• It has to be used 12.5 to 13 % w/w to get the better performance.
• It gives very good emulsion up to 750 ppm and 400 TDS.
Typical Properties
Appearance | Light yellow to dark brown color clear liquid. |
Specific Gravity | 0.985 To 1.1 |
pH | 6.5 to 7.5 |
Acid value | 10 max |
13 % solution in 150 SN (HPCL) | Clear |
![]() |
5. Soluble Cutting Oil Emulsifier

Engine Oil Additive-4T Gasoline

Introduction:
4T GASOLINE ENGINE OIL ADDITIVE is a multifunctional additive for use in formulating Four Stroke Gasoline Engine Oils. It is detergent additive package possessing excellent thermal oxidation stability characteristics. It has been developed to fulfill the severe requirements of lubricating oil for FOUR STROKE engines. Finished oils containing the recommended concentration of 4 T GASOLIN ADDITIVE exceed the engine test performance requirements for API Classification. It is designed to meet the lubricating performance requirements for four stroke cycle gasoline engines. 4 T gasoline additive contains Zinc Dithiophosphate in order to meet JASO T903:2006 Phosphorus requirements (0.08% min) .
Formulations:
It is a performance package for the formulation of single and multigrade four stroke gasoline enigne capability. Rationalisation is possible to both higher and lower performance levels. |
|
Performance Level | 4 T Gasoline additive, mass% |
API SL / JASO MA2 | 6.2 |
API SJ | 5.7 |
API SG | 5.1 |
![]() |
6. Engine Oil Additive-4T Gasoline

ENGINE OIL ADDITIVE – MULTIPURPOSE

Introduction:
A multifunctional additive for use in formulating crankcase oils suitable for gasoline and diesel engines. It is a highly detergent additive package possessing excellent thermal oxidation stability characteristics. It has been developed to fulfill the severe requirements of lubricating oil for high output engines.
Applications:
• Compatible with catalytic converters.
• Controls oil thickening by virtue of its excellent dispersive action.
• Cleans carbon deposits formed in the combustion chamber.
• Extends oil life & reduces oil consumption.
Typical Properties:
Specific Gravity@15.6° C, ASTM D-1298 | 110 |
Viscosity @ 100 , cst | 1.0050 |
Total Base Number, mg KOH/g, ASTM D-2896 | 105 |
![]() |
7. Engine Oil Additive_Multipurpose

POLYISOBUTYLENE SUCCINIC ANHYDRIDE (PIBSA)

Introduction
PIBSA (PIBSA is short for Polyisobutylene Succinic Anhydride) is a lubricant additive intermediate prepared from high reactive polyisobutylene (Mn=1000) by thermal adduction process.
Applications:
• Use in preparing polyisobutylene succinimide, and boride ashless dispersant
• Use in preparing emulsifying agents for emulsion explosives
• Use in preparing processing additive for petroleum chemical plant
Chemical Properties:
ACID VALUE | 36.09 mg KOH/ gm of sample |
SAPONFICATION VALUE | 83.00 mg KOH/gm of sample |
TBN | 42 |
% N | 3.1 |
![]() |
8. POLYISOBUTYLENE SUCCINIC ANHYDRIDE (PIBSA)